FULL HEIGHT ROTOR TURNSTILE
RTD-15 full height rotor turnstiles for indoor and outdoor operation
The full height rotor turnstile RTD-15 offers a combination of complete closure of passageway, modern design and high throughput performance.
- turnstile with internal electronics
- guide barrier set
- remote-control panel
- for outdoor and indoor operation
- 120° rotor position
- two LED direction indicators
- flush set walkway downlights
- motorized RTD-15.1
- electromechanical RTD-15.2
This range of rotor full height turnstiles is intended for both indoor and outdoor use. The housing enables turnstile operation at ambient air temperature from -40°C to +55°C.
The robust welded aluminium structure of the turnstile offers utmost reliability and vandal resistance, and ensures the turnstile stable operation even in harsh environment for many years.
The fine structured powder coating with mica iron-effect provides superior corrosion protection, effective electric insulation and improved impact resistance.
|Two LED directional indicators||Cable remote control panel|
The turnstile is provided with bright built-in LED indicators to show if access is granted or denied. Optionally the remote light indicators can be connected.
The RTD-15 can be operated from the remote control panel included in a standard delivery set or a wireless remote control (optionally) and can be easily integrated into most access control systems. The operating modes are set up independently for each passage direction.
The turnstile features:
- two flush mounted 24V/50W halogen lamps located on the top channel as standard
- anti-backup device to prevent reverse rotation once the rotor has turned more than 60°
- “Fire Alarm” input to unblock the turnstile from fire alarm system or emergency button
- “Lock-chamber” access operation for additional visual verification
|Key override function
for emergency situations
|Two flush set
Two built-in mechanical release locks, one for each passage direction, allow unlocking the turnstile with a key for free passage in case of power failure or necessity to override an access control system ACS.
When operating under an access control system (ACS), the turnstile can support pulse and potential control modes. The turnstile outputs have galvanic isolation. The logic is protected against short circuit, overload and polarity inversion.
Due to low power consumption, the turnstile comes with safe voltage – 24V max.
Available in the same material and colour as the RTD-15 turnstiles, full height MB-15 railings and WHD-15 security gates will help to form a passageway of any required configuration and make the entrance design complete.
For protection against downfalls and climbing over, the turnstile may be supplied with a protective canopy to be joined into a single portal structure with the turnstile.
A number of RTD-15 turnstiles with canopies can be mounted in one row. Special couplings have been designed to provide reliable joining of two or more canopies. This design also allows cable laying through all the top channels of the lined turnstiles, which makes the installation considerably easier.
By means of an extra foundation frame RF01, the turnstile can even be installed on an unstable ground.
24±2 V DC
24±2 V DC
|Number of operating modes:
|Overall dimensions (H × W × D)||2325×1800×1600 mm|
|Passageway width||755 mm|
|Ingress Protection Rating||IP53 under EN 60529|
-40°C to +55°C
+1°C to +40°C
Cebu City Office
Cagayan De Oro Branch
Metro Manila Branch
Davao City Branch
Ground Floor, ATM Business Center
(Near Robinsons Place) Corner Jalandoni
Ledesma Street, Iloilo City, Philippines
Copyright © 2013 Gigaworkz Technologies, All Rights Reserved